Important Things You Must Know About Engineered Wooden Flooring

Engineered wooden flooring is a type of hardwood floor that has been engineered to be resistant to wear and tear. It’s made by reducing the thickness of the wood, which makes it lighter than traditional hardwood floors. Engineered wood floors are easy to care for, resistant to scratches, burns, dents, and stains. This article will give you some insight into what you should know about engineered wooden floors.

https://www.tamalpaishardwoodfloors.com/wp-content/uploads/IMG_0672-1170x530.jpg

An Overview Of Engineered Flooring?

Engineered flooring is a type of wood that has been glued together with the grain running perpendicular to one another. The joints are then planed off so they can’t be seen from above. This design eliminates the traditional need for nails or screws when installing a engineered wood floor and makes it easier to install, as no nail holes need to be drilled.

Difference Between Engineered Wood vs. Solid Hardwood?

Engineered wooden floors are made of multi-layered wood, with an engineered core that is laminated. This means the floor will be strong and flexible yet light in weight. The lamination process ensures a seamless finish without any visible joints between boards. Engineered wood can also be prefinished or unfinished to allow homeowners to pursue their desired finish. 

Solid hardwood flooring is made of a single piece of wood that has been planed and sanded to create an even surface on both the top and bottom of the board. Solid hardwoods are more expensive than engineered woods, but they provide better sound dampening qualities for homes with children or pets running around. They also last much longer than engineered woods.

How Thick Is Engineered Wood Flooring?

Engineered wood flooring is made up of thin layers of real wood glued together. The thickness may vary depending on the manufacturer and its quality but typically ranges from approx. 0.12 inches to 0.75 inches thick or as thick as your typical hardwood floor (0.375 inches). Most engineered floors are less than 0.75in thick, which benefits those who want to have natural wood appearance without the thickness.

What Is The Style Of Engineered Hardwood?

Engineered hardwood or engineered wood flooring is made from a solid plank of heat-treated lumber that has been bonded with adhesive to create an even thickness. This eliminates the need for complex and time-consuming manufacturing processes like those required in traditional hardwood production. The planks are then sanded smooth and finished using polyurethane or oil to create a deep, natural gloss.

Does Engineered Hardwood Scratch Easily?

The answer to this question is no. Engineered hardwood flooring boards are glued together and then pressed with heat, which creates a very tight bond between the layers of wood that’s impenetrable by scratches or dents.

How Long Will An Engineered Wood Floor Last?

A wood floor installation can usually last 50 years, but it depends on where the wood is installed. The temperature and humidity are significant factors in how long an engineered hardwood will last. A warmer or drier climate with less moisture in the air will make for a longer-lasting product than one that lives in a more excellent area of higher humidity.

We hope this article has given you a better understanding of engineered wooden floors and what they can do for your home.